About JSAN

Characteristics

Original Software Mounted !

• Control window (A) is displayed on the left monitor and data display window (B) is displayed on the right monitor

• Considering the operability of the hard controls, all are consolidated on one window. Conditions of fluorescence detection, sorting and CloneMate sorting can be set by tab selection.

• Software is managed by the tabs. Settings of collecting data, equipment, sorting and graph analysis are consisted of each tabs. This enables the equipment control prompt and easy.

Control Window (A)	Data Display Window (B)

Multi-user Login Function !

• The direct login in the file of the individual experimenter enables the file management easy.

  Login Window

 

Integration with Microsoft Applications !

• It is possible to copy the graphs on the clipboard and paste it on Microsoft Word,
  Excel and PowerPoint.

Longer Lifetime Laser >> Cost Reduction !

• Lifetimes for 488 nm solid-state laser and 638 nm semiconductor laser are 10,000 hours and three-hold with the conventional gas lasers.

• Laser replacement cost is about one third of water-cooling laser with high output power.

• Lifetime of 375 nm semiconductor laser is 3,000 hours and almost equivalent with the conventional gas laser. But replacement cost is one third.

 

No Power Source with 200V, Three-phase Required !

• Required power supply is only two system for 100V with single phase and 15A.

• Special electric works are not required.

 

No Cooling Water Required !

• Cooling water of 10 liters per hour and drain facility such as water-cooling lasers are not required.

 

Reduction for Consumed Sheath Fluid !

• Adoption of 30 psi sheath pressure enabled the consumed sheath fluid to be reduced less than other high-speed sorters.